Refurbished EX4200-48T-DC Technical Specifications
Juniper Networks EX 4200 48T switch 48 ports managed
| Manufacturer | Netscreen |
|---|---|
| Brand | Juniper, Juniper Networks |
| Product Line | Juniper Networks EX 4200 |
| Model | :48T |
| Packaged Quantity | :1 |
Chassis
| Built-in Devices | Status LCD |
|---|
Processor
| Type | PowerPC |
|---|---|
| Clock Speed | :1 GHZ |
RAM
| Installed Size | :1 GB |
|---|
Flash Memory
| Installed Size | :1 GB, 1 GB |
|---|
Networking
| Type | Switch |
|---|---|
| Subcategory | Network hubs and switches |
| Subtype | Gigabit Ethernet |
| Form Factor | Desktop |
| Stackable | Stackable |
| Max Units In A Stack | :10 |
| Ports Qty | :48 |
| Advanced Switching | Layer 3 |
| Routing Protocol | RIP-2, VRRP, IS-IS, Policy-based routing (PBR), IGMPv2, BGP, IGMP, OSPF, Static IP routing, PIM-SM, IGMPv3, RIP-1 |
| MAC Address Table Size | :24K entries |
| Manageable | Yes |
| Remote Management Protocol | RMON 1, SNMP 1, SNMP 2, HTTP, SNMP 3, HTTPS, RMON 2, SSH-2, RMON, RMON 3, RMON 9 |
| Status Indicators | LCD display |
| Features | DHCP support, Syslog support, Jumbo Frames support, DHCP snooping, IGMP snooping, DoS attack prevention, 256-bit encryption, IPv6 support, Time Domain Reflectometry (TDR), Hot swap module replacement, Virtual Chassis technology, VLAN support, DHCP proxy, ARP support, Power over Ethernet (PoE), Dynamic ARP Inspection (DAI), Store and forward, RADIUS support, Layer 3 switching, Routing, DHCP server, Auto-uplink (auto MDI/MDI-X), Quality of Service (QoS), Temperature sensor, Non-Stop Bridging (NSB), High Availability, MPLS support, Redundant trunk group (RTG), Non-Stop Routing (NSR), Layer 2 switching, Graceful Route Engine Switchover (GRES) |
| Compliant Standards | IEEE 802.1ab (LLDP), IEEE 802.1D, IEEE 802.1s, IEEE 802.1x, IEEE 802.1w, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP) |
Ports
| Qty | :48 |
|---|---|
| Type | :10/100/1000 |
Expansion Slots
| Expansion Slots | :1 (total) / 1 (free) x expansion slot |
|---|
Interface Provided
| Interfaces | :1 x network stack device, 8 x 10Base-T/100Base-TX/1000Base-T – RJ-45 PoE, 40 x 10Base-T/100Base-TX/1000Base-T – RJ-45, 1 x management |
|---|
Software
| Type | Juniper NetScreen-Security Manager |
|---|
Power Device
| Type | Internal power supply |
|---|---|
| Hot-Plug | Hot-plug |
| Power Redundancy | Yes |
| Installed Qty | :1 |
| Max Supported Qty | :2 |
| Power Consumption Operational | :190 watt |
Miscellaneous
| Height (Rack Units) | :1 |
|---|---|
| Encryption Algorithm | TTLS, PEAP, TLS, MD5 |
| Authentication Method | RADIUS, Extensible Authentication Protocol (EAP), TACACS+, Secure Shell v.2 (SSH2) |
| Compliant Standards | IEC 60950-1, EN55022 Class A, EN55024, VCCI Class A ITE, EN 60950-1, UL 60950-1, CISPR 22 Class A, CSA 22.2 No. 60950, ICES-003 Class A, cUL, TUV GS, RoHS 5/6, EN300-386, FCC CFR47 Part 15, EN 300 386 |
Dimensions & Weight
| Width | :17.4 inch |
|---|---|
| Depth | :16.4 inch |
| Height | :1.7 inch |
| Weight | :17.2 lbs |
Environmental Parameters
| Min Operating Temperature | :32 degree Fahrenheit |
|---|---|
| Max Operating Temperature | :113 degree Fahrenheit |
| Humidity Range Operating | :10 – 85% |

